First impressions are important with bathrooms. Nobody will tell you how good your pipes are.
Before making an offer, check both obvious and hidden leaks. A dripping tap may be easy to fix, but a leak beneath the floor can be costly. Both deserve a closer look.
What you’ll learn:
- Read the Warning Signs on Walls and Floors
- Check Beyond the Apartment Door
- Put the Taps and Drains to the Test
- Inspect Visible Pipes and Hot Water Systems
- See Where Water Goes Outside
- Decide What to Do Before Making an Offer
- Wrapping It Up
Read the Warning Signs on Walls and Floors
Start by checking spots you might otherwise miss if the apartment is freshly decorated.
Around the bottom of the bathroom, next to the shower, ceilings beneath upstairs bathrooms and near the toilet. Look out for peeling paint, warping of the skirting, loose tiles or discolouration that may indicate water damage.
A musty smell in a closed cupboard may be a clue as well, which should be noted, particularly if it’s within a small space such as a wardrobe. Discolouration can be from water, not always a pipe; check if it could be poor air circulation or leaking rainwater.
Note repeated signs of damage and ask what caused them. A fresh coat of silicone or paint may have just been done for maintenance, there is no guarantee that it’s been fixed from a leak previously.
Check Beyond the Apartment Door
If you are purchasing an apartment, water damage may come from outside your unit.
If there is a mark on your ceiling, it could be from your upstairs apartment, piping from a main supply or even leaking from a balcony. When you inspect your own bathroom, there may not be enough information about the property as a whole.
You should get an apartment building inspection to determine any obvious faults that can be accessed in the building. To see what this type of inspection covers, visit https://inscopeinspections.com.au/apartment-building-inspection-melbourne/. Inspectors may note any signs of moisture, water damage and look around wet areas such as balconies.
Look at building records. These should include the owners corporation certificate and any previous minutes from meetings. These can be helpful in knowing what work has been done, planned or how much money the owner corporation may charge the residents. Make sure to ask about any leaks, repairs to water proofing or any special levies.
Make sure the owner corporation is aware of the issue, ask for written records rather than relying on a promise that it will be fixed, ask them what they can provide you with and what is under their jurisdiction.
Put the Taps and Drains to the Test
There are many things you can test without needing to pull anything apart. Ask the agent for permission to run the taps during the inspection.
Once you have access to the property, you can start to test all your water:
- Open the taps, go through your kitchen, bathroom and laundry. Look for any leaks, low water pressure or flow rate that differs from other taps.
- Test your hot water; see if the hot water is coming and how long it takes to heat. You can ask what is happening and how long it’s been an issue.
- Watch the water draining and put a small amount of water in your basin and see how long it takes to drain away.
- Flush the toilet. You can see if it drains properly and if your water tank is constantly running.
- Once you have used the facilities, take a peek under your sinks and see if there is any water leaking.
If you have one basin that’s slow it may only need a good clean, however if all your fixtures are draining slowly, maybe emitting foul odours you may need to inspect your waste water pipes.
As mentioned earlier, this is only a temporary way of checking for leaks. If you do not see any issues, you cannot assume that nothing will happen later on. Take note of what happens and move forward from there.
Inspect Visible Pipes and Hot Water Systems
Take a look under your sink; you may notice your cupboard is warping, rust around the pipes or any moisture. Flexi-hoses are commonly found under your sink and appliances throughout the home.
According to Suncorp Insurance, frayed, corroded, twisted and stretched flexi-hoses should be looked at. When doing inspections over the past six months in 2025, they found 30% of customers had flexi hoses that needed replacement. Again, this was based on all the flexi hoses they looked at when visiting customers homes, and there are many properties that don’t have these issues.
Speak to a plumber and see if they can take a look, as you shouldn’t be tampering with these during your viewing.
Once you’ve located your hot water system, look for any corrosion, moisture build-up or pooling. Find out how old the hot water system is, if it has been serviced and whether it has failed before. An older system doesn’t always mean it will fail, just keep an eye on it.
Some houses may have an accessible meter. You can ask a plumber to do a water test by having all taps and water-using appliances switched off. If there is movement of your meter, you can find out what may be using water. If you live in an apartment, there may not be a way to monitor your meter, so this can be difficult to determine.
See Where Water Goes Outside
Checking your outside area is important when looking for any plumbing faults.
Make sure to look at all your gutters, outdoor taps, pavers and any drains that may be accessible on ground level. Any pooling of water around your house or soggy ground may show a sign of a leak, unless it’s rained or you’ve watered your garden.
Think about where your water will go; if you have a big storm, where will the water flow to? If you have a missing gutter or drains that may be blocked, the water can travel to your home and cause issues, even if there is no faulty pipe in your house.
If you notice any smells or overflows from drains outside, do not lift drain covers or attempt to clear a blockage. Call a plumber if you need them to check.
There could be multiple drains around the home that you can check so speak to a plumber and ask whether a camera inspection of the drains is needed. You can only inspect your home visually and if a pipe is buried, you’ll need a professional to look at that for you.
Decide What to Do Before Making an Offer
If you’ve spotted any of these issues, it’s not automatic that you should not make an offer, just something you need to be aware of.
There are some basic questions you should ask: What is causing the issue? Can they provide you with any information that will show it’s been repaired? Ask for receipts if necessary. Maybe the seller changed their tap recently, but it could have been leaking for some time.
A building inspector can inspect the house and let you know of any defects. Have a plumber come if you think your pipe is leaking or there are any water issues and ask them what their service provides; sometimes plumbing reports will not inspect every pipe in the house. If the water pipe is not showing, you may not be able to tell from a report.
Before making an offer, Consumer Affairs Victoria recommends speaking to a building inspector about your property. If you feel there is a need to speak to someone about your offer, contact a lawyer and find out what options you have.
If you believe something may need to be repaired, ask the seller for some sort of documentation. You can always ask about what surrounding areas may have been damaged. Your cabinet, floor or walls may need to be replaced once a pipe has been repaired.
Hopefully this helps you spot any plumbing faults and what to do if you come across them while viewing a property.
Wrapping It Up
A viewing before you buy is never going to guarantee your home is free from faults, however, spotting these issues can allow you to ask your seller or arrange for an inspection if you need one.
